New Rig Recommendation Time

FarligOpptreden

FarligOpptreden

New member
So, I've finally decided to take the plunge on a new rig after I saw Rebel Tech selling a grand total of TWO gorgeous KFA[SUP]2[/SUP] GTX680s for a mere R3,407 each. Sadly, when I got home after work to place the order, they were already sold out. That didn't stop me from thriving on the immense high of buying a new gaming rig. The kind email attendant at Rebel Tech then recommended the following machine for my budget of roughly R10,000. I'd also like some input from you guys (and gals). Keep in mind that I'm only considering an nVidia GPU and want a Haswell i5.

So, here was what Rebel Tech recommended:

Total inc VAT: R10,763

So... GO!
 
Last edited:
hmm...might as well have shot at this then subsequent posters will have something to attack. :D

I don't like that build...at all. It just doesn't feel right & I'd suggest you dump the entire thing. If you need a specific reason...they are pairing a 1600mhz memory controller with "premium" 1333 RAM module....which is puzzling to say the least.

As for advice...best I can do is some noobish comments/guesses. :D

>Replace PSU with a corsair
>Add a small OS SSD even if you have to cut corners elsewhere
>Push for 16gig RAM
>Avoid "premium" RAM unless overclocking
>Take a good look at wootware too...I did a rebeltech/wootware mix and it worked well

Also...you got pm.
 
Got the PM thanks. I thought MyG loves this kind of thread, so I'm kinda surprised by the lack of replies... Anyway, I will never overclock and might consider SLI one day if the value proposition makes sense.
 
I am going to strongly urge you to rather go for an aMD gpu. For that price you could pick up a 280X if you know where to look.
The 280X features an extra gig of ram, higher bit rate and performance levels closer to a 770 for less.
2nd thing is don't go for a crossfire / sli thought process if you don't plan on actually doing it within 18 months. Cards are released quicker than a new perfume comes out and the performance gains often leave everyone wondering if they should sell their current cards and buy a single newer generation rather than sli'ng their current config.
Ram is pricey at the moment, I would keep it at 8 for now, can always upgrade later.
SSD's can also wait till a later date I reckon.
 
There will be more replies throughout the day I'm sure, had a quick look through the specs...

- Would swap out the Gigabyte PSU for Corsair/Seasonic/Be Quiet!
- 2x4gb kit instead of the single 8gb module linked.

Check carbonite if you have no problem buying second hand stuff.
 
Thanks for the reply so far guys! Reason I'm opting for nVidia is I'm a PhysX whore... So unless I have an alternative with the AMD route I'd prefer to stick with nVidia.
 
FarligOpptreden said:
Thanks for the reply so far guys! Reason I'm opting for nVidia is I'm a PhysX whore... So unless I have an alternative with the AMD route I'd prefer to stick with nVidia.
Click to expand...

As I said I would go for the AMD route. PhysX on a weaker card gets you so far, you need to be willing to sacrafice performance for a PhysX look. I am sure the Joker will concur :P
 
I'm used to gaming on a GT650M laptop (with PhysX, of course), so anything more than that would be a HUGE gain! :p

But I get your point - the AMD cards offer more bang-for-buck, but PhysX is soooooooo tempting! It was beautiful (and playable) in Borderlands 2, but completely unplayable in the Batman games...
 
Beauty lasts for so long, what happens down the line when you have to start turning things down with a weaker card? Doesn't look so pretty then does it.
Check out the performance ratings of them.
 
Any particular reason for that case? I've had the urge to get a new PC to play new games at 1080p on the highest settings with a small form factor build. But I haven't really done any research on the required parts for such a build. Not sure if going SFF will dramatically change the cost of the build.
 
phool said:
Any particular reason for that case? I've had the urge to get a new PC to play new games at 1080p on the highest settings with a small form factor build. But I haven't really done any research on the required parts for such a build. Not sure if going SFF will dramatically change the cost of the build.
Click to expand...

You might want to read through my previous thread on a Steam Box / HTPC, in other words, SFF PC. I have no preference for any chassis or parts, except for the the nVidia / Haswell requirement. The specs listed in the OP were what Rebel Tech recommended and quoted me and I posted that to get the ball rolling.
 
phool said:
Any particular reason for that case? I've had the urge to get a new PC to play new games at 1080p on the highest settings with a small form factor build. But I haven't really done any research on the required parts for such a build. Not sure if going SFF will dramatically change the cost of the build.
Click to expand...

Generally SFF (mITX) components will be a little more expensive than going with mATX as well as more limiting in terms of expandability and ability for future upgrades, I built the rig in my sig last year around October and it came to around R 11k iirc. This is excluding mouse/kb/headset/monitor/speakers/hdd. The only components that would be mITX specific would be the mobo, chassis and then personally I would say a modular PSU. The rest can be kept the same as any other build depending if your chosen chassis can accommodate the components.

Also requires some degree of planning in order to make sure all your components will fit in your chosen chassis etc.
 
My specs (as detailed in Sig), run all my games in 1080p @30-60FPS, with moderate-to-high settings all round.

Only a game like Crysis 3 forces me to drop many details to Low, albeit, still looking damn good despite that.
 
You must log in or register to reply here.
Back
Top