Silent but deadly...

robertybob

New member
So has anyone got a powerful gaming rig that is also whisper quiet?

I know the two seem to be in conflict with each other, but I've been wondering about going seriously quiet for my next upgrade.

Silent PC Review has a decent i7-2600k system that runs super quiet but at R14000 its not cheap either and the GPU isn't cutting edge....
 
Along with sound dampered gaming cases
Also I have one that is whisper quiet, Alienware m17X Laptop lol
 
I just got a cm690 with a custom watercooling setup. I wasn't really looking for wc but it just happened to be available at a very good price. While it's not exactly inaudible, it definitely runs below the noise level where I notice it, and the main thing is that it NEVER increases in noise, not even overclocked in prime95 stress tests. If silent powerful pc's are your thing you really can't beat water.
 
My rig is super quiet! And you can have a look at my sig for my rig specs! When you get your case fans you should try aand get the biggest fans you can. The bigger the fans the quieter the rig. SSD's also very quiet, water cooling etc.
 
The thing is, with any high-end rig you're going to have a certain amount of noise. An overclocked CPU, one or more powerful graphics cards, a powerful PSU and multiple harddrives guarantee a certain level of noise. All these components also basically rule out a case like the Silencio. The noise padding adds an appreciable percentage to the heat, even with a mid-level rig. For a high-end rig, I'd recommend watercooling for the CPU, aftermarket air cooling for the graphics cards (watercooling graphics cards is HIDEOUSLY expensive - R5k upwards), decent fans for your case (140mm, preferably) and a solidly built case (so the panels don't rattle). To make a high-end PC silent is a very expensive endeavor, but if you really want it, you can do it.

Incidentally, my rig is lacking several of the above components. I don't have aftermarket cooling on my 5870s, I have crappy thermaltake case fans, and my Xaser VI case has very flimsy side-panels. So yeah, I know why you'd want a silent PC...
 
I'm kinda scared of watercooling for some reason. I think because I've never done it and its the next level of modding as opposed to just sticking stock parts into a M/B.

Maybe I'll have to bite the bullet and have a go at it. I tried to go a bit quiet last time. but think that the case cooling options and fans let me down a bit. I did install a 120mm aftermarket cpu cooler though.
 
I'm kinda scared of watercooling for some reason. I think because I've never done it and its the next level of modding as opposed to just sticking stock parts into a M/B.
Maybe I'll have to bite the bullet and have a go at it. I tried to go a bit quiet last time. but think that the case cooling options and fans let me down a bit. I did install a 120mm aftermarket cpu cooler though.

Well the new watercooling sets by CM and Antec etc are about as simple as it gets. But they're kind of not 'real' watercooling if you ask the pros, nevermind that they achieve just as good temps and noise. But they are pretty failsafe I think. Check out the Kuhler or the H70/100.
 
If you really want a Cool system have a look at this offering from OCZ. Its called a phase change system. You can use it to get your CPU a little under room-temperature temperatures. Like -45 to -50 degree Celsius. Its awesome. Kind of works like a deep freeze. Anyone else seen this type of cooling or does anyone have this type of cooling?

Here is video about it from ASUS Booth at Blizzcon. Watch from 5min32sec into the video.

 
No worries I'll check that out... They're playing the right game for starters ;)

I currently have an Antec sonata 500 case but think I probably need to focus more on components and fans so thanks for the recoms. I'll read up the parts mentioned.
 
Anyone know of local distributors supplying these "phase changers" ?
Bet im going to need some special mountings for the cpu & graphics cards (perhaps the ram aswell).
Wonder if we have some local suppliers for these ?
 
Anyone know of local distributors supplying these "phase changers" ?
Bet im going to need some special mountings for the cpu & graphics cards (perhaps the ram aswell).
Wonder if we have some local suppliers for these ?

I dont know where you could get hey. You might have to import to get them. Are you considering it? Do you need your PC to run at -50?
 
best way to have a silent PC is 120mm liquid bearing fans... not these cheap nasty things, or 80mm fans that scream away! lol

get rid of all your spinning drives, replace with SSD

and buy a starter watercooling kit. I took the plunge a while back and got the H60. Not a fancy system, but its better than air if you push pull working properly with a proper airflow in your case

quite possible, without having to spend a fortune
 
Look, that phase change cooling from OCZ looks nice, but the reviews have not had many positive things to say about it. They also say it's helluva loud, which is not what you want. Also, PCs with phase change cooling in aren't exactly the most mobile pcs around, so lugging it around for a lan is a real pain in the back (quite literally, I suspect).

Before I started watercooling, I was also a bit leery of doing it, I mean the thought of putting water in the same immediate vicinity as my expensive hardware was flipping terrifying. The thing is though, there are a LOT of people on the SA IT forums with substantial experience at watercooling. This means that there is always help around in terms of planning a setup. As jasong says, if you don't want to start with a full custom kit from the get go, you can always get the self-contained units. I do disagree with him that they're as good as the custom units, though. Custom units let you build exactly what you want into your case, which makes the custom setup a lot more flexible and future-proof. For example, on my loop I can just change out the mounting rig on my waterblock if I get a different CPU. Or I can change out the reservoir if I decide I'd prefer more coolant in my loop. Or I can change out my radiator, if I decide that it's just not efficient enough. You can't do that with a pre-built loop, so you're gonna have to buy more expensive equipment if you decide to change (and you will, believe me. I've been through 5 different loop setups in the past 4 years, as my hardware has changed).

The great thing about pre-built watercooling though, is the fact that you can literally just slap it in your pc. I mean, it's almost completely foolproof. So that means the pre-built kits are great for building your confidence, and learning more about watercooling generally. The thing is, the more you learn about watercooling, the more you'll want to chill your cpu so you can push it further. Once you're past a certain threshold, the pre-built kits just can't stand up to the extreme overclocking and you'll have to go for a custom kit if you want to push it further.

So yeah, you have a choice now. You can go with a very nice, very easy-to-use self-contained setup which - if you don't start OCing a lot - should see you through a few years, or you can take the plunge and research and plan out a more future-proof and extreme custom setup.

Let us know what you choose :)
 
Back
Top