Official MechWarrior Online Thread (NDA Lifted!)

Can you set weapon groups with the 4 mechs u get to try in the beginning??? finall got the game on sat and my telkom line is down thatnx to the storm :/

Yep,you usually have to set your weapon groups at the start of a game after you add new weapons to a mech.

The trail mechs overheat easily so make sure to manage your weapons groups.
 
Sold my Gauss Cat. Built a Streak Cat.

Open Beta starts tomorrow. Time to try something new before Closed Beta is over!
 
Sold my Gauss Cat. Built a Streak Cat.

Open Beta starts tomorrow. Time to try something new before Closed Beta is over!

I had a streak cat before,you need to have a large engine when running a streak cat so you can close the distance without too much difficulty.You should also be able to max the armor on a streak cat without too much of a problem.

Chassis Name: Catapult
Model Name: CPLT-A1
Variant Name: Streak Cat

Engine: 310 XL Engine
Internal Type: Std Internals
Armor Type: Std Armor
Heat Sinks: 19 (12) Standard Heat Sinks

Tonnage: 65.00
Speed: 77.3 kph
Armor Total: 416
Alpha Strike Damage: 30.00
Alpha Strike Heat: 12.00
Firepower: 8.57 dps
Heat Efficiency: 55.42%
Effective Range of Loadout: 270m

Head: 18/18
Right Torso: 42/60
Right Rear Torso: 18/60
Center Torso: 62/84
Center Rear Torso: 22/84
Left Torso: 42/60
Left Rear Torso: 18/60
Right Arm: 40/40
Left Arm: 40/40
Right Leg: 57/60
Left Leg: 57/60

Right Arm:
Streak SRM2
Streak SRM2
Streak SRM2

Left Arm:
Streak SRM2
Streak SRM2
Streak SRM2

Right Torso:
Streak SRM Ammo
Streak SRM Ammo
Streak SRM Ammo
Streak SRM Ammo
Heat Sink
Streak SRM Ammo
Case

Left Torso:
Streak SRM Ammo
Streak SRM Ammo
Streak SRM Ammo
Streak SRM Ammo
Heat Sink
Streak SRM Ammo
Case

Center Torso:
Heat Sink

Head:

Right Leg:
Heat Sink
Heat Sink

Left Leg:
Heat Sink
Heat Sink

File created using MWO Mechbay
 
Last edited:
I'm going to be saving up for this once it hits open Beta.
Chassis Name: Dragon
Model Name: DGN-1C
Variant Name: High Speed Dragon

Engine: 360 XL Engine
Internal Type: Std Internals
Armor Type: Std Armor
Heat Sinks: 15 (14) Double Heat Sinks

Tonnage: 60.00
Speed: 97.2 kph
Armor Total: 400
Alpha Strike Damage: 27.00
Alpha Strike Heat: 19.00
Firepower: 8.43 dps
Heat Efficiency: 53.85%
Effective Range of Loadout: 270m

Head: 18/18
Right Torso: 36/56
Right Rear Torso: 20/56
Center Torso: 56/80
Center Rear Torso: 24/80
Left Torso: 36/56
Left Rear Torso: 20/56
Right Arm: 40/40
Left Arm: 40/40
Right Leg: 55/56
Left Leg: 55/56

Right Arm:
AC2

Left Arm:
Medium Laser
Medium Laser

Right Torso:
AC2 Ammo
AC2 Ammo
AC2 Ammo
Streak SRM Ammo
Case

Left Torso:
Medium Laser
Medium Laser
Double Heat Sink

Center Torso:
Streak SRM2

Head:

Right Leg:

Left Leg:

File created using MWO Mechbay

A fast dragon that can act as a scout and chase down lights without too much trouble.

AC/2 is for knocking enemies so they can't fire back and medium lasers are for damage.SSRM2 is for scaring lights.
 
I had a streak cat before,you need to have a large engine when running a streak cat so you can close the distance without too much difficulty.You should also be able to max the armor on a streak cat without too much of a problem.

I don't think I'm gonna have enough time to farm credits to get the XL engine.

Just running with the STD 260 engine atm. Sitting on 1.5mil credits.
 
Lol,you still have a week before open Beta.I make 2.5mill a day playing with Premades.Especially last night where a group used a method to win a game under 5minutes.

Stack AMS and let all the Atlas mechs walk at the front while pushing to their base with the shortest route.
 
Lol,you still have a week before open Beta.I make 2.5mill a day playing with Premades.Especially last night where a group used a method to win a game under 5minutes.

Stack AMS and let all the Atlas mechs walk at the front while pushing to their base with the shortest route.

Oh crap. I thought Open Beta is tomorrow?

Yah I played with some Yanks over the weekend. I made around 3mil. Worked quite well together. Definitely easier with premades.

I'll see if I can join tomorrow night again. Should roll a Streak Kitty with me, pick targets apart :D
 
Oh crap. I thought Open Beta is tomorrow?

Yah I played with some Yanks over the weekend. I made around 3mil. Worked quite well together. Definitely easier with premades.

I'll see if I can join tomorrow night again. Should roll a Streak Kitty with me, pick targets apart :D

I played with one before but it didn't suit my style,it's basically just get in close and wait for the lockon then fire,they usually hit the center torso but some good players will turn their mechs to spread the damage around.

Nice thing about the Streak cat is that you can put the streaks in chainfire and just keep pounding a target and he won't be able to hit back accurately.
 
I seem to be getting a lot of lag :(

will have to go fiddle with the settings a bit I think
 
Patch is live,the new stuff is pretty expensive.lost a game in my dragon and 80,000cb but the repair bill was 175,000cb.
 
still dont know how to change my weapon groups but maybe hen i actually buy my own mech ill be able to set them up :P
 
You should be able to set them up already,they are essential in any mech.

Use the arrow keys and right ctrl.

Left and right arrow keys is to select a weapon group and up and down is to select a weapon.

Lets say i start with a mech with only one weapon

I would use the up and down arrow keys to select the weapon and then use the left and right arrow keys to select the weapon group and then i would press right ctrl to assign the weapon to that weapon group.
 
So, my mech is gone, but I have 16 mil credits.

Dunno what mech to buy now..

DC - What's the best variant of the Atlas?
 
Last edited:
So, my mech is gone, but I have 16 mil credits.

Dunno what mech to buy now..

DC - What's the best variant of the Atlas?

depends,The D-DC Variant is pretty balanced for all roles.

Also if you are going to use the new ferro,endo and DHS components then only use them on mechs that mount very few weapons.they won't fit on mechs that carry allot of weapons.
 
depends,The D-DC Variant is pretty balanced for all roles.

Also if you are going to use the new ferro,endo and DHS components then only use them on mechs that mount very few weapons.they won't fit on mechs that carry allot of weapons.

I was thinking of goin with the AS7-K variant.

I dunno what to do lol. This patch has totally put me out of wack. I dunno what mech I want to build now lol.

What are you building?

*edit*

I see the D-DC has a command console. What the heck is that?

Also, is it wise to go with an XL Engine in an Assault mech? If your torso gets popped you're dead. Higher chance of dying no?

I must have a chat with you some time when you are available. Work out a strat for us and I'll build accordingly me thinks ;)
 
Last edited:
The command console is what it says,when you press B to open the map you can also open the command console top left to give orders on the fly.it's usefull for pubs where you don't have guys on TS but mostly the players will just ignore it.(they don't like sitting still much so they end up dying one by one when they go over a hill with a ton of enemies at the other side)

Cool,Most people run an XL in an Atlas to free up space.By the time you lose a torso you are probably close to death even without an XL engine.

Do note that the XL engine is expensive to repair on larger mechs.

I have a Dragon and an Awesome now,here are my builds for them so far:

DRG-1C
Chassis Name: Dragon
Model Name: DGN-1C
Variant Name: Super Dragon

Engine: 300 XL Engine
Internal Type: Endo Steel
Armor Type: Std Armor
Heat Sinks: 12 (12) Double Heat Sinks

Tonnage: 60.00
Speed: 81.0 kph
Armor Total: 400
Alpha Strike Damage: 39.00
Alpha Strike Heat: 21.00
Firepower: 10.15 dps
Heat Efficiency: 42.99%
Effective Range of Loadout: 180m

Head: 18/18
Right Torso: 39/56
Right Rear Torso: 17/56
Center Torso: 60/80
Center Rear Torso: 20/80
Left Torso: 39/56
Left Rear Torso: 17/56
Right Arm: 40/40
Left Arm: 40/40
Right Leg: 55/56
Left Leg: 55/56

Right Arm:
Gauss Rifle

Left Arm:
Medium Pulse Laser
Medium Pulse Laser

Right Torso:
Gauss Ammo
Gauss Ammo
Gauss Ammo
Gauss Ammo
Endo Steel
Endo Steel
Endo Steel
Endo Steel
Endo Steel

Left Torso:
Medium Pulse Laser
Medium Pulse Laser
Endo Steel
Endo Steel
Endo Steel
Endo Steel
Endo Steel
Endo Steel
Endo Steel

Center Torso:
Endo Steel
Endo Steel
Double Heatsink
Double Heatsink

Head:

Right Leg:

Left Leg:

File created using MWO Mechbay
And my Awesome-8T
Chassis Name: Awesome
Model Name: AWS-8T
Variant Name: Awesome-8T

Engine: 240 XL Engine
Internal Type: Std Internals
Armor Type: Std Armor
Heat Sinks: 15 (9) Double Heat Sinks

Tonnage: 71.50
Speed: 48.6 kph
Armor Total: 480
Alpha Strike Damage: 90.00
Alpha Strike Heat: 35.00
Firepower: 22.12 dps
Heat Efficiency: 33.26%
Effective Range of Loadout: 630m

Head: 18/18
Right Torso: 48/68
Right Rear Torso: 20/68
Center Torso: 60/100
Center Rear Torso: 38/100
Left Torso: 48/68
Left Rear Torso: 20/68
Right Arm: 48/52
Left Arm: 48/52
Right Leg: 66/68
Left Leg: 66/68

Right Arm:
Medium Pulse Laser
Medium Pulse Laser
Double Heat Sink
Double Heat Sink

Left Arm:
Medium Pulse Laser
Medium Pulse Laser
Double Heat Sink
Double Heat Sink

Right Torso:
LRM15
AMS
AMS Ammo
Double Heat Sink
LRM Ammo

Left Torso:
LRM15
LRM Ammo
LRM Ammo
LRM Ammo
Double Heat Sink

Center Torso:
LRM Ammo
LRM Ammo

Head:
Medium Pulse Laser

Right Leg:

Left Leg:

File created using MWO Mechbay

It's till incomplete,the repair bill for these 2 are pretty high when i lose and even when i win it takes about 80-90% of my payment to repair my mech.
 
Last edited:
Back
Top